Rubi MIX-9 POWER MAX Manual De Instrucciones página 8

ENGLISH
TRANSLATION OF THE ORIGINAL
INDEX
1
USING THE MACHINE
Components / Elements of the machine
2
SAFETY WARNINGS
Symbols
Precautions
Work area
3
OPERATING INSTRUCTIONS
Assembly instructions
Starting the machine
Cleaning and maintenance
4
ACCESSORIES
5
EU DECLARATION OF CONFORMITY
UK DECLARATION OF CONFORMITY
6
GUARANTEE
1.- USING THE MACHINE
The RUBIMIX POWER MAX has been designed for mixing
powdered construction materials such as: mortar, plaster,
adhesives, as well as paints, lacquers and other similar
substances that do not contain solvents. The user is solely
responsible in the case of improper use.
Components
RUBIMIX-9 POWER MAX
Elements of the machine (pag.2)
1 Handle
2 Power- on / off
3 Two-speed gearbox
4 Unlock button switch
5 Protective case engine
6 Air vent
7 Toolholder
8 Wrench ( 19 mm)
9 Spanner (22 mm)
10 Mixing head Ø 120 mm mortar
11 Set of replacement brushes
12 Instruction Manual
2.- SAFETY WARNINGS
2.1 Symbols
Read the instruction manual
Caution
Attention: Keep away from fire
8
Attention: Keep away from moisture
Wear safety glasses
Use indoors
CE mark
Conforms to WEEE
Class II machine
2.2 Precautions
GENERAL SAFETY PRECAUTIONS FOR TOOLS.
¡WARNING!
When electrical tools are used, you should always follow
basic safety precautions to reduce the risk of fire, electric
shock and personal injury. Read these instructions carefully
before using this product and keep for your records.
1. Security of the work area
a. Keep the area clean and well lit. Cluttered and dark
work areas invite accidents.
b. Do not operate electrical tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust atmospheres. electrical tools
create sparks which may ignite the dust fumes.
c. Keep away from children and curiousity while
operating a electrical tool. Distractions can cause you
to lose control.
2. Electrical safety
a. The plug on the machine must match the base of the
socket. Never modify the plug in any way. Do not use
use any adapter plugs with grounded electrical tools.
Unmodified plugs and matching bases will reduce the
risk of electric shock.
b. Avoid body contact with earthed surfaces such as
pipes, radiators, cookers and refrigerators.
is an increased risk of electric shock if your body is
grounded.
c. Do not expose electrical tools to rain or wet
conditions. The water entering the tool will increase
the risk of electric shock.
d. Do not misuse the cord/cable. Never use the cord/
cable for carrying, lifting or unplugging the electrical
tool. Keep cords/cables away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a electrical tool outdoors , use an
extension cord suitable for outdoor use. The use of
an extension cord suitable for outdoor use reduces the
risk of electric shock.
f. If the use of a tool in a damp location is unavoidable ,
use a protected residual current device ( RCD ) power.
Use of an RCD reduces the risk of electric shock.
There