Publicidad
Idiomas disponibles
Idiomas disponibles
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or % fi, then press OK or
SELECT PICTURE CONTROL
SET MODE
3
Move the highlight bar (arrow) to "PICTURE CON-
TROL" by pressing CH 5 ∞ or % fi, then press OK or
to select the desired mode.
HR-J6006UM
FUNCTION
B.E.S.T.
=PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
VIDEO STABILIZER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO*: Normally select "AUTO".
It automatically adjusts the picture quality.
* When B.E.S.T. is set to "OFF" (
can only select "NORM" instead of "AUTO".
EDIT:
Select when you dub tapes.
SOFT:
Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTES:
● When you select "EDIT", "SHARP" or "SOFT", the
selected mode will not change until you select again.
● When you select "EDIT" to dub tapes, be sure to
select "AUTO" (or "NORM" when B.E.S.T. is set to
"OFF") after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
Select "EDIT" when you are dubbing tapes. Refer to page 29.
Downloaded from:
https://www.usersmanualguide.com/
.
HR-J4406UM
FUNCTION
ON
B.E.S.T.
AUTO
=PICTURE CONTROL
OFF
AUTO TIMER
ON
SUPERIMPOSE
OFF
AUTO SP = EP TIMER
ON
VIDEO STABILIZER
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
pg. 20) , you
Video Stabilizer
By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable recordings
that were made on another VCR. When this function is set to
"ON", vertical vibration will be automatically corrected. *The
default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH5 ∞ or
%fi, then press OK or
ACTIVATE VIDEO STABILIZER
3
ON
AUTO
HR-J6006UM
OFF
ON
OFF
B.E.S.T.
ON
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
=VIDEO STABILIZER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Move the highlight bar (arrow) to "VIDEO STABILIZER"
by pressing CH5 ∞ or %fi , then press OK or
"ON" .
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
● When you finish viewing the tape, be sure to set it back to
"OFF".
● Regardless of the setting, this function has no effect, during
recording and during special-effects playback.
● The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
● To watch recordings with close-caption, it is necessary to set
the Video Stabilizer to "OFF".
= FUNCTION SET
TUNER SET
INITIAL SET
.
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
HR-J4406UM
FUNCTION
ON
B.E.S.T.
AUTO
PICTURE CONTROL
OFF
AUTO TIMER
ON
SUPERIMPOSE
OFF
AUTO SP = EP TIMER
ON
=VIDEO STABILIZER
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
17
EN
MAIN MENU
FUNCTION
ON
AUTO
OFF
ON
OFF
ON
to set to
Publicidad
