Evenflo PIVOT XPAND Manual De Instrucciones página 11

1
CLICK!
2
CLICK!
1
2
Assembling Your Stroller - Wheels
Turn the stroller so the front of
the stroller is facing upwards as
shown.
To attach front wheels, push
wheel onto front leg tube until
it clicks into place. Repeat on
other side. Pull on wheels to
make sure both of them are
securely attached.
Turn the stroller upside down as
shown so the rear of the stroller
is facing upwards.
To attach rear wheels, push
wheel onto rear leg tube until
it clicks into place. Repeat on
other side. Pull on wheels to
make sure both of them are
securely attached.
Assembling Your Stroller - Basket
To attach basket, locate the
basket assembly bar and ensure
CLICK!
the push buttons are on the
bottom. Push basket assembly
bar onto frame until it clicks
into place on both sides with an
audible click.
Once installed, pull on the
basket assembly bar to make
sure it is locked into place.
Complete assembly by zipping
basket fabric around basket
assembly bar and attaching
snap buttons on both sides of
the stroller frame.
11