Descargar Imprimir esta página

SodaStream GENESIS Guía De Usuario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

CREATE THE BUBBLES
1. Fill the Plastic Carbonating Bottle with cold water up to the fill line.
WARNING! Do not carbonate anything other than water. Other
liquids can contaminate and clog internal parts, potentially
resulting in excessive pressure, bottle failure during
carbonation and serious injury. Never carbonate after
flavouring has been added.
2. To insert the Carbonating Bottle, make sure that the Carbonating
Bottle holder is angled forward. Please make sure you do not pull
the carbonating tube. WARNING! Never use a Sparkling Water
Maker with a broken carbonating tube. This can cause
excessive pressure, bottle failure and serious injury. Screw the
Carbonating Bottle counter-clockwise into the Sparkling Water
Maker until it is held firmly and then push the Carbonating Bottle
towards the body the Sparkling Water Maker until it is held in a
vertical position suspended above the base.
3. To carbonate, press the carbonating button in short 1 second
presses; 3 presses for standard carbonation and 5 presses for
strong carbonation.
4. When the desired level of carbonation is achieved, gently pull the
Carbonating Bottle towards you until it reaches its fully forward
position. This will release all the pressure in the Carbonating
Bottle. Unscrew the Carbonating Bottle to remove it from the
Sparkling Water Maker. WARNING! Do not remove Plastic
Carbonating Bottle until after hearing the sound of excess CO
being released. Attempting to remove the Plastic Carbonating
Bottle while it is still pressurized can cause uncontrolled
ejection of the Plastic Carbonating Bottle and may result in
serious injury.
CARE
SPARKLING WATER MAKER CARE
• Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft
damp cloth to gently clean.
• Wipe spills to keep base dry.
• Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water
Maker.
PLASTIC CARBONATING BOTTLE CARE
• For Plastic Carbonating Bottles which are not "dishwasher safe", to clean, rinse Plastic Carbonating
Bottles with cold or lukewarm water. WARNING! Do not expose to heat above 120°F / 50°C. Never
wash or rinse in hot water. Do not wash in dishwasher.
• For "dishwasher safe" Plastic Carbonating Bottles, to clean, either wash in dishwasher or rinse Plastic
Carbonating Bottles with cold or lukewarm water. WARNING! Do not expose to heat above 158°F / 70°C.
1
2
A
3
Note: You may see small pieces of ice appear
in the water during carbonation of very cold
water. Any ice created will simply melt.
2
4
1 6
C
B

Publicidad

loading