Publicidad
Step 7
Fasten the DRAWER UPRIGHTS (A and B) to the TOP (C).
å
Tighten four TWIST-LOCK® FASTENERS.
These holes should be
closer to the front edge of
the TOP (C).
www.sauder.com/services
Finished edge
Front edge of TOP
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking the
FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
A
B
C
415010
®
FASTENER
Dowel end
Page 11
Publicidad
