Publicidad
Step 10
You will need a second person to help in this step. You may want to stand the parts on end to drop glue into the holes
å
pointed out.
First, fi ll the holes in edge of the TOP (C) 1/4 to 1/2 full with GLUE (8M).
å
Gather the LEG FRAME that has RIGHT STRETCHERS (L) label on it. Fasten the LEGS (G and H) to the BACK (D) and the
å
SHORT FRONT (F). Tighten two TWIST-LOCK® FASTENERS. Wipe away the excess GLUE.
Next, fi ll the holes in one end of the LONG STRETCHERS (J) 1/4 to 1/2 full with GLUE (8M).
å
With someone's help fasten the LONG STRETCHERS (J) to the RIGHT STRETCHERS (L). Tighten the HIDDEN CAMS in
å
the STRETCHERS. Wipe away the excess GLUE.
Next, fi ll the holes in the opposite edge of the TOP (C) and LONG STRETCHERS (J) 1/4 to 1/2 full with GLUE.
å
Gather the remaining LEG FRAME. Fasten the LEGS (G and H) to the BACK (D) and LONG FRONT (E). Tighten two
å
TWIST-LOCK® FASTENERS. Wipe away the excess GLUE.
Fasten the LONG STRETCHERS (J) to the LEFT STRETCHERS (K). Tighten the HIDDEN CAMS in the STRETCHERS. Wipe
å
away the excess GLUE.
Drop glue into the lower
holes only in each end
of the STRETCHERS (J).
8M
K
G
H
K
Page 14
J
J
C
Drop glue into these holes.
G
L
F
D
Drop glue into the lower
holes only in each end
of the STRETCHERS (J).
415010
1
L
2
H
Drop
glue into
this hole.
Drop glue into
this hole.
Fill the holes 1/4 to 1/2 full with GLUE.
www.sauder.com/services
Publicidad
