Publicidad
Step 4
First, fi ll the holes in the LEGS (G and H) 1/4 to 1/2 full with
å
GLUE (8M). Then, insert four WOOD DOWELS (15F) into
the holes. Wipe away the excess GLUE.
Now, fi ll the holes in the RIGHT STRETCHERS (L) 1/4 to
å
1/2 full with GLUE. Then, insert the WOOD DOWELS
in the LEGS (G and H) into these holes. Wipe away the
excess GLUE.
Fasten the RIGHT STRETCHERS (L) to the LEGS (G and
å
H) as shown in the upper diagram. Tighten four HIDDEN
CAMS.
NOTE: Be sure the CAM SCREWS in the LEGS (G and H)
å
insert into the STRETCHERS (L).
Repeat this step using the LEFT STRETCHERS (K) and
å
LEGS (G and H) as shown in the lower diagram.
These holes
must be here.
These holes
must be here.
The CAM SCREW
must be here.
H
Page 8
The CAM SCREW
must be here.
K
15F
These holes
must be here.
L
15F
H
G
K
The CAM SCREW
must be here.
415010
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
G
L
The CAM SCREW
must be here.
1
2
www.sauder.com/services
Publicidad
