TEMPUR-PEDIC TEMPUR ERGO SMART Manual Del Propietário página 14

installation guide
STEP 11
Using the remote, move the head of
the base to its full upright position.
STEP 12
Confirm that the LED on the black
Sleeptracker processor is blinking
green. This may take up to 90
seconds after connecting power to
the Smart Base. This indicates that
the processor is powered up and
ready to connect to a WiFi network.
STEP 13
The customer should scan
the QR code on the remote
control packaging (A) or
on the rear side label of the
remote control (B) to set up
the Sleeptracker App.
10
or
(A) (B)
To complete the Smart Base setup, download the TEMPUR
SLEEPTRACKER-AI App and follow the in-app prompts.
®
Once the app is connected, it will allow access to the full
functionality of your new TEMPUR ERGO
BY SLEEPTRACKER-AI .
®
Setup is now complete! Test all functions on remote.
®
SMART POWERED
®