Descargar Imprimir esta página

TEMPUR-PEDIC TEMPUR ERGO SMART Manual Del Propietário página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

remote control
Remote control arrives paired to the adjustable base.
Two (2) AAA batteries are required to operate the remote.
PRESET
Zero-G
®
Adjusts your legs to relieve pressure off the lower
back.
Flat *
One-Touch Flat lowers head and foot to flat position
and turns off massage (if running).
TV in Bed Preset Position ‡
Brings head and foot into position for viewing TV.
QuietMode™ Preset Position ‡
Help relieve snoring for you or your partner with the
push of a button, gently tilting the mattress position
to help reduce snoring.
Favorite 1 & 2 Preset Positions‡
Reprogrammable Preset Positions.
Underbed LED lighting *
Press to turn on/off underbed LED lighting. Press
and hold for three (3) seconds to turn off LED brand
badge.
* Not user programmable.
‡ Can be reprogrammed to user desired position.
The ZERO-G
, TV in Bed, Anti-Snore, and Favorite 1 in bed presets
®
can be re-programmed to any position chosen by the user. Simply
adjust the bed to the desired position, then press and hold any of
the 4 buttons down until the remote backlight flashes twice. The
button is now re-programmed.
To restore the buttons to their original positions, press and hold the
One-touch Flat and Zero-G
The remote backlight will flash twice to indicate the original
positions have been restored.
12
buttons simultaneously for 5 seconds.
®
MASSAGE
Head Zone Massage Control
Activates simple steady-state massage and toggles
through 2 intensity levels. Low, high and off.
Foot Zone Massage Control
Activates simple steady-state massage and toggles
through 2 intensity levels. Low, high and off.
Massage Wave Mode Control
Turns on and activates programmed massage
mode. Toggles wave modes 1, 2 ,3 and off. Intensity
default to low.
Press the Massage Wave Mode Control button to choose the desired
mode (1,2,or 3), then use the Head Zone Massage Control and/or the
Foot Zone Massage Control buttons to cycle through the available
intensity levels. Once the massage wave mode is chosen, it will run
for 30 minutes unless it is cancelled by pressing the Massage Wave
Mode Control button repeatedly until massage stops.
If one of the wave massage modes is not needed, pressing Head
and/or Foot Zone Massage buttons will initiate massage for those
zones and cycle through 2 different intensity levels as well as "OFF".

Publicidad

loading