Babify Dual Plus Manual De Instrucciones página 48

EN
48
Handle positions
To adjust the handle from one position to another, press the red buttons on
both sides of the child car seat simultaneously and turn the handle.
The carrying handle has four positions:
1. Installation position in the car.
2. Upright position for carrying or for inserting into the pram as a travel
system.
3. Position for stowing and storage.
4. Position to support the baby while feeding.
Note: Before lifting the child seat, always make sure that the handle is fully
engaged (until you hear a click), that the belt is properly fastened and that
the belt buckle is properly locked.
Use as a travel system
• Install the child seat:
Place the adapter on the base of the
pushchair and push the adapter into the
slot until you hear a click. The adapter is
now attached.
• Very important: Make sure
you hear a click. You can try pulling the
child seat up and forward to check that the
adapter is engaged.
• Remove the child seat:
Hold the child seat firmly, lift the red switch
of the adapter with your fingers and take
the child seat down.