Bosch GWX18V-13C Instrucciones De Funcionamiento Y Seguridad página 21

Wire Cup Brush Assembly
A type 27 wheel guard may
not be used for all tool op-
erations. Do not discard guard when not in use.
Always reinstall wheel guard when converting
back to grinding operations. When using Wire
Cup Wheels, tool may be used without a guard.
Wear
when handling wire brush
accessories. Handling of wire brush accessories
without gloves may result in personal injury.
To install wire cup brush (Fig. 15)
Follow instructions for Mounting and Removing
X-Lock Accessories starting on page 17.
Wire Wheel Assembly
To install wire wheel (Fig. 16)
1. Inspect and adjust Type 27 Wheel Guard (8)
to the proper position, as shown in figure 7
on page 16.
2. Follow instructions for Mounting and Remov-
ing X-Lock Accessories starting on page 17.
160992A5K0 GWX18V-13CP 202206.indd 21
page heading Assembly
protective gloves
-21-
Fig. 15
Wire Cup
Brush
Fig. 16
(6)
(Sold separately)
(8)
Wire Wheel
6/27/22 7:17 AM