Crosscall X-COMM Manual De Instrucciones página 16

Idiomas disponibles

Thank you for choosing Crosscall and for buying this product!

The quick start guide will show you how to get started with your new device.

USING THE X-COMM FOR THE FIRST TIME

1. CHARGE:

Via X-LINK™*: Place the X-LINK™* connector (4) of the X-COMM on a charging device of the

X-LINK™* ecosystem, e.g. X-DOCK, X-CAR and X-POWER STATION (see complete list on the

crosscall.com website).

Via USB: Open the waterproof cap (16) and plug in the X-COMM using the USB-C cable provided.

The LED light will turn red to indicate that the product is charging. The LED indicator gradually

fills in until charging is complete and the LED indicator is full. It is possible to recharge the battery

even if it is detached from the main X-COMM unit.

2. GETTING STARTED: Press and hold the «On/Off & Discreet Mode» button (9) for 5 seconds

to turn on the X-COMM. The LED indicator will light up green, and an audible signal followed

by a voice indicating «Power On» will activate. All the sound signals can be disabled using the

«X-COMM app».

3. CONNECTION:

Via Bluetooth®: On powering on, Bluetooth® is automatically activated, a voice indicates

«Bluetooth® connection». To activate or deactivate Bluetooth®, press the «On/Off & Discreet

Mode» button (9) 3 times. A voice will indicate «Bluetooth® on» or «Bluetooth® off». The 2 LEDs

will flash alternately green and red. To identify your X-COMM, find the ID on the top right-hand

corner of the X-COMM.

•

Option 1: On your device, turn on Bluetooth® and look for the X-COMM in the list of

detected devices.

•

Option 2: If your device is equipped with Near Field Communication (contactless

technology), place the back of your device near the PTT2 soft button (14).

•

Option 3: With your device, scan thanks to the «X-COMM app» application, the QR code

located on the top back of the X-COMM.

Once paired, you will hear a voice saying «Connected», and you will not be able to pair another

smartphone without resetting the X-COMM to factory settings.

Via cable: Use the X-LINK™* cable and plug the USB-C connector into the USB-C port (12) of

the X-COMM, and the X-LINK™* connector to your terminal. Connecting the cable automatically

disables Bluetooth®.

4. SHUT DOWN: Press and hold the «On/Off & Discreet Mode» button (9) for 5 seconds to turn

off the X-COMM. The LED indicator will light up red, and a voice saying «X-COMM off» will

activate.