Crosscall X-COMM Manual De Instrucciones página 18

FR
• 2 lit bars indicate a battery charge between 26% and 50%
• 3 lit bars indicate a battery charge between 51% and 75%
• 4 lit bars indicate a battery charge between 76% and 100%
EN
If you see a single flashing bar, it means the X-COMM needs charging.
reset the x-comm (factory settings)
ES
To reset your X-COMM to factory settings, and remove the X-COMM from the device it is paired
with, press 8 times the «On/Off & Discreet Mode» button (9).
x-comm programming
DE
The X-COMM buttons, alerts, voices, and LEDs are programmed using the «X-COMM app» on
your smartphone (Android compatible).
IT
IN THE BOX
• X-COMM
• USB-C/X-LINK™* connection cable
PT
• USB-C/USB-A charging cable
• USB-A charger
NL • Quick start guide
PRECAUTIONS FOR USE
• Small parts may cause choking.
HR
• Always store this device between 0 and 40 degrees to maximise its lifespan.
• It is recommended that your X-COMM be used in temperatures between 0°C and 40°C.
• Do not expose to dust, direct sunlight, high humidity, heat or any mechanical impacts.
PL
• Avoid impacts.
• If the device overheats, falls or has been damaged, please stop using it immediately.
• Do not allow children or pets to chew or lick the device.
SL
• Do not use harsh cleaning agents or solvents such as petrol or alcohol: risk of damage.
• Be careful with the edges, uneven surfaces, metal parts of this device and its packaging
to avoid possible injury or damage.
AR
• Do not modify, repair or disassemble this device. Doing so may result in fire, electric
shock, or complete destruction of the device. None of this is not covered by the warranty.
• Do not attempt to change a part by yourself. If a part needs to be changed, contact your
dealer.
SR
16