Ninja INTELLI-SENSE CT682SP Serie Manual Del Propietário página 11

USING YOUR AUTO-SPIRALIZER®
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
IMPORTANT: After spiralizing an
ingredient, all leftover pieces must be
removed from the Collecting Bowl and
Blade Disc before spiralizing again.
NOTE: To find out how to properly
prep your ingredient, refer to the Food
Prep section in your Quick Start Guide
or your Inspiration Guide.
NOTE: Never spiralize multiple
ingredients at one time.
1 Before spiralizing, prepare your
ingredient by cutting it so that it is no
more than 3 inches wide. Place the
prepped ingredient into the Feed Chute,
through the opening at the top.
20 ninjakitchen.com
2 Center the ingredient on the pin in the
center of the Blade Disc, then push down,
securing the ingredient onto the pin.
3 Place the Food Pusher on top of the
ingredient and press down firmly to
hold in place.
4 Select GO to begin spiralizing. Continue
to press firmly with Food Pusher to
guide ingredient through Feed Chute.
5 Spiralizing is complete when the Food
Pusher sits flat atop the Feed Chute Lid.
Press STOP to power off the motor.
6 To remove the Spiralizer Bowl from
the motor base, turn the bowl
counterclockwise and lift.
7 To remove the Feed Chute Lid, press
the release button on the left side
of the front tab, then twist the lid
counterclockwise and lift.
8 Remove the Collecting Bowl by lifting it
out of the Spiralizer Bowl. Remove the
Blade Disc by gripping the handles on
the side of the disc and lifting.
9 Remove the noodles from the Collecting
Bowl and prepare as desired.
10 Unplug the appliance when finished.
To release the motor base, place your
hands underneath it and gently pull it
toward you. Refer to page 22 for storing
instructions.
ninjakitchen.com 21