Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
PROFESSIONAL PLUS
KITCHEN SYSTEM WITH AUTO-IQ®
BN800 Series | Owner's Guide
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if
the warning included with this symbol is ignored.
For indoor and household use only.
When using electrical appliances, basic safety precautions should always be followed, including the following:
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions
must always be followed, including the following numbered warnings and subsequent
instructions. Do not use appliance for other than intended use.
1
Read all instructions prior to using the appliance and its accessories.
2 Carefully observe and follow all warnings and instructions. This unit contains electrical connections
and moving parts that potentially present risk to the user.
3 Take your time and exercise care during unpacking and appliance setup. This appliance contains
sharp, loose blades that can cause injury if mishandled.
4 Take inventory of all contents to ensure you have all parts needed to properly and safely operate your
appliance.
5 All blades are sharp. Handle carefully.
6 ALWAYS exercise care when handling the Pro Extractor Blades® Assembly. The blades are sharp.
ONLY grasp the Pro Extractor Blades Assembly by the outer perimeter of the blade assembly base.
Failure to use care when handling the blade assembly will result in a risk of laceration.
7 This product is provided with a Stacked Blade Assembly and a Chopping Blade Assembly. ALWAYS
exercise care when handling blade assemblies. The blade assemblies are sharp and are NOT locked
in place in their containers. The blade assemblies are designed to be removable to facilitate cleaning
and replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use
care when handling the blade assemblies will result in a risk of laceration.
8 Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before assembling
or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the
outlet. NEVER unplug by grasping and pulling the flexible cord.
9 Before use, wash all parts that may contact food. Follow washing instructions covered in this
instruction manual.
10 Before each use, inspect blade assemblies for damage. If a blade is bent or damage is suspected,
contact SharkNinja to arrange for replacement.
11 DO NOT use this appliance outdoors. It is designed for indoor household use only.
12 This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
13 DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions
or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
ninjakitchen.com
Publicidad
Manuales relacionados para Ninja BN800 Serie
Resumen de contenidos para Ninja BN800 Serie
- Página 1 PROFESSIONAL PLUS KITCHEN SYSTEM WITH AUTO-IQ® BN800 Series | Owner’s Guide IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY Read and review instructions for operation and use. Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if the warning included with this symbol is ignored.
- Página 2 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY WARNING 39 If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions contact one of the blades and experience a laceration.
- Página 3 PARTS FEATURES Pitcher Lid Use the Power button to turn the unit on or off. Precision Processor® Bowl Lid AUTO-IQ® PROGRAMS Spout Lid Intelligent preset programs combine unique blending and pausing patterns that do the work for you. Once a preset program is selected, it will start immediately and automatically stop when blending is 72 oz.* Total Crushing®...
- Página 4 USING THE TOTAL CRUSHING® PITCHER USING THE SINGLE-SERVE CUP IMPORTANT: IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding. • Review all warnings at the beginning of this Owner’s Guide before proceeding. • As a safety feature, if the pitcher and lid are not properly installed, the timer will display “..” and the motor will be disabled.
- Página 5 USING THE PRECISION PROCESSOR® BOWL CARE & MAINTENANCE CLEANING IMPORTANT: • Review all warnings at the beginning of this Owner’s Guide before proceeding. Separate all parts. Wash all containers in warm, soapy water with a soft cloth. • As a safety feature, if the blade assembly is not fully seated, you will not be able to install and lock the lid. •...
- Página 6 TROUBLESHOOTING GUIDE ONE (1) YEAR LIMITED WARRANTY WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before troubleshooting. The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.
- Página 7 CONSIGNES DE SÉCURITÉ IMPORTANTES VEUILLEZ LES LIRE ATTENTIVEMENT AVANT D’UTILISER L’APPAREIL POUR UN USAGE DOMESTIQUE SEULEMENT SYSTÈME DE CUISINE PROFESSIONAL PLUS AVEC AUTO-IQ® 12 Cet appareil est muni d’une fiche polarisée (une broche est plus large que l’autre). Pour réduire le risque de décharge électrique, cette fiche sera insérée dans une prise polarisée dans un seul sens.
- Página 8 CONSERVEZ CES INSTRUCTIONS PIÈCES AVERTISSEMENT Couvercle de pichet Pichet Total Crushing® de 2 L (72 oz)* Pour réduire le risque de blessure, d’incendie, d’électrocution ou de dommages matériels, des mesures de sécurité de base doivent toujours être respectées, comme les avertissements numérotés ci-dessous Bloc moteur et les instructions qui les suivent.
- Página 9 CARACTÉRISTIQUES UTILISATION DU PICHET TOTAL CRUSHING® Utilisez le bouton Power (mise en marche) pour mettre l’appareil à on (marche) ou à off (arrêt). IMPORTANT : • Lisez attentivement tous les avertissements au début du présent Guide de l’utilisateur avant de poursuivre. PROGRAMMES AUTO-IQ®...
- Página 10 UTILISATION DU GOBELET À PORTION INDIVIDUELLE UTILISATION DU BOL PRECISION PROCESSOR® IMPORTANT : IMPORTANT : Lisez attentivement tous les avertissements au début du présent Guide de l’utilisateur avant • Lisez attentivement tous les avertissements au début du présent Guide de l’utilisateur avant de poursuivre. de poursuivre.
- Página 11 SOINS ET ENTRETIEN GUIDE DE DÉPANNAGE NETTOYAGE AVERTISSEMENT : Pour réduire les risques d’électrocution et de mise en Séparez toutes les pièces. Lavez tous les contenants dans l’eau chaude savonneuse avec un chiffon doux. marche involontaire, éteignez et débranchez l’appareil avant tout dépannage. •...
- Página 12 La garantie limitée d’un an s’applique aux achats effectués auprès de détaillants autorisés de SharkNinja Operating LLC. La garantie s’applique uniquement au premier propriétaire et au produit original et n’est BN800 Serie | Manual del Propietario pas transférable. SharkNinja garantit ce produit contre toute défectuosité de matériau ou de main-d’œuvre pour une INSTRUCCIONES IMPORTANTES DE SEGURIDAD période d’un (1) an à...
- Página 13 INSTRUCCIONES IMPORTANTES DE SEGURIDAD CONSERVE ESTAS INSTRUCCIONES LEA ESTAS INSTRUCCIONES DETENIDAMENTE ANTES DEL USO PARA USO DOMÉSTICO SOLAMENTE ADVERTENCIA 36 Al picar, mantenga las manos y los utensilios fuera del recipiente para reducir el riesgo de lesiones personales graves o de daños en la licuadora/picadora de alimentos. Se puede utilizar una espátula Para reducir el riesgo de lesiones, incendio, descargas eléctricas o daños materiales, siempre se ÚNICAMENTE cuando la licuadora o el procesador no se encuentren en funcionamiento.
- Página 14 PIEZAS CARACTERÍSTICAS Tapa de la jarra Presione el botón de Power (encendido) para encender o apagar la unidad. Jarra Total Crushing® de 72 oz.* PROGRAMAS AUTO-IQ® Son programas inteligentes preconfigurados que combinan patrones únicos de licuado y pausa que Base del motor hacen todo el trabajo por usted.
- Página 15 CÓMO UTILIZAR LA JARRA TOTAL CRUSHING® CÓMO UTILIZAR EL VASO INDIVIDUAL IMPORTANTE: IMPORTANTE: Revisa todas las advertencias al principio de esta Guía del Usuario antes de comenzar. • Revisa todas las advertencias al principio de esta Guía del Usuario antes de comenzar..
- Página 16 CÓMO UTILIZAR EL BOL PRECISION PROCESSOR® CUIDADO Y MANTENIMIENTO LIMPIEZA IMPORTANTE: • Revisa todas las advertencias al principio de esta Guía del Usuario antes de comenzar. Separe todas las piezas. Lave todos los recipientes en agua tibia con jabón utilizando un paño suave. •...
- Página 17 GUÍA DE SOLUCIÓN DE PROBLEMAS ADVERTENCIA: Para reducir el riesgo de descargas y de operación accidental, apague y GARANTÍA LIMITADA DE UN (1) AÑO desenchufe la unidad antes de resolver el problema. La garantía limitada de 1 año se aplica a las compras realizadas a los vendedores minoristas autorizados de SharkNinja Operating LLC.
- Página 18 NOTES REGISTER YOUR PURCHASE ENREGISTREZ VOTRE ACHAT REGISTRE SU COMPRA registeryourninja.com Scan QR code using mobile device Lisez le code QR à l’aide de votre appareil mobile Escanee el código QR con un dispositivo móvil RECORD THIS INFORMATION TECHNICAL SPECIFICATIONS NOTEZ LES RENSEIGNEMENTS Voltage: 120V~, 60Hz...
- Página 19 Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. AUTO-IQ, NINJA, PRECISION PROCESSOR, PRO EXTRACTOR BLADES, and TOTAL CRUSHING are registered trademarks of SharkNinja Operating LLC.