Publicidad
Idiomas disponibles
Idiomas disponibles
PERFORMANCE
Model
Submersible
Utility Pump
Function
UTM02501K
Non-
Submersible
Transfer Pump
Function
PRE-INSTALLATION
APPLICATION
This pump can be used as a submersible utility pump. It is suitable for draining or removing water from the
following: hot tubs, stock tanks, flooded basements, water gardens, flat roofs, pool covers, window wells.
This pump can be also used as a non-submersible transfer pump. It is suitable for draining or removing from the
following: water heaters, boats, waterbeds, clogged sinks, aquariums, wash machines, utility sinks.
WARNING: Risk of pump failure, property damage and bodily injury. Before using this pump to drain a hot
water heater, be sure to read the manufacturer's instructions. The water temperature in the water heater must be
cooled down to 95°F or lower before draining with this pump.
DO NOT USE THIS PUMP: with flammable liquids or in salt-water marine areas; as a sump, sewage, or effluent
pump; to recirculate water or run continuously for fountains and water features.
MATERIALS REQUIRED (NOT INCLUDED)
SPECIFICATIONS
Power supply
Liquid Temp. Range
Discharge
Power Cord
2
HP
0 ft.
1/4
1,600
1/4
950
3/4" Garden Hose (25 ft. max. length)
115V, 60 HZ., 10 Amp Circuit minimum
32 to 95°F (0- 35°C)
3/4 in. garden hose thread
SJTW, 18AWG/3C, 10 ft.
Discharge Flow (GPH)
5 ft.
10 ft.
1,500
1,300
840
730
For Professional Technical Support call 1-844-242-2475
15 ft.
20 ft.
950
700
600
400
Max.
Lift
25 ft.
210
30 ft.
170
30 ft.
Publicidad
