Descargar Imprimir esta página

FuelTech 9588 Guía De Instalación Rápida página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

Important warnings for the proper installation of this product:
Always cut the unused parts of cables off – NEVER roll up the excess as it becomes an interference capturing antenna and it can
result on equipment malfunction.
Limited warranty
All products manufactured by FUELTECH are warranted to be free from defects in material and workmanship for one year following the
date of original purchase.
Warranty claim must be made by original owner with proof of purchase from authorized reseller. This warranty does not include sensors or
other products that FUELTECH carries but did not manufacture. If a product is found defective, such products will, at FUELTECH's option,
be replaced or repaired at cost to FUELTECH.
Characteristics
Sampling rate: 2 to 100Hz
20 digital and analog inputs (0-5V) for reading position, pressure, temperature, and buttons or switches.
4 differential inputs for magnetic or hall effect sensors for frequency readings such as wheel speed, transmission and driveshaft rotation,
fuel flow sensors, among others.
CAN communication with Power FT lineup (FTCAN 2.0).
34-way automotive connector.
Dimensions
Height: 4.52 in
Width: 3.54 in
Depth: 1.77 in
Electrical Specifications
Power: 9V to 30V
EN
Max Current 5V output: 150 mA
Package content
FT Input Expander
Owner's Manual
16

Publicidad

loading