Publicidad
Idiomas disponibles
Idiomas disponibles
PHONE SETUP:
Wall Mount
Dekstop
bracket screws
Installing the Phone (Wall Mount *Sold seperately):
1. Remove the desktop bracket by unscrewing the 4 screws with a philips
head screwdriver.
2. Attach the wall mount to the slots on the back of the phone.
3. Attach the phone to the wall via the wall mount hole.
4. Pull out the tab from the handset cradle (see figure below).
5. Rotate the tab and plug it back into the slot with the extension up to hold
the handset while the phone is mounted on the wall.
Wall mount
Using the Phone Stand:
For installing the phone on the table with the phone stand, attach the phone
stand by screwing the 4 screws on the upper half side using a philips head
screwdriver (see figure below).
~ 3 ~
CONNECTING THE PHONE:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch
Slots for
wall mount
3. Connect the 12V DC output plug to the power jack on the phone; plug the
spacers and
phone stand.
4. The LCD will display booting up or firmware upgrading information. Before
5. Using the web configuration interface or from the menu of the touch screen,
Handset Rest
*USB enabled only when power supply or PoE+ is used.
Tab with
Tips for using the GXV3470 Keys:
extension up
Tab with
•
extension down
•
•
•
or a router (LAN side of the router) using the Ethernet cable.
power adapter into an electrical outlet. If PoE switch is used in step 2, this
step could be skipped.
continuing, please wait for the main screen display to show up.
you can further configure network connection using static IP, DHCP... etc.
*USB Port
Kensington
HDMI OUT Port
lock
3.5mm
PC Port
Headset Port
LAN Port
Reset Hole
Tap on VOLUME DOWN / UP keys
to adjust volume on the phone.
Tap on HOME key to return to
the default idle screen. Or press
and hold on the HOME key for 2
seconds to take a screenshot.
Press MENU key to access phone's
display settings, edit widgets and
thread manager. Or press and hold
on the MENU key for 2 seconds
to
enter
managing
application
interface directly.
Press BACK key to go back to the
previous menu.
~ 4 ~
RJ9
Headset
Port
Handset
Port
Power
Message Waiting
Indicator
Volume
Home
Back
down
Volume
Menu
up
Publicidad
