HAGER WERKEN HF1 Surg Bipolar Manual De Instrucciones página 30

GB User Manual
Settings:
Sound for buttons
Brightness of display
Adjustment of display
Loudness of warning sound
Reset to factory settings by pressing the button for a longer time - until you hear a beep.
All storable parameters – except CODE – will be resetted to factory settings.
30
The sound for button confirmation can be set ON / OFF.
Brightness of the display can be set in steps 1 – 10,
confirm with button.
The display can be adjusted horizontally and vertically. To do so, use a
sharp instrument (i.e. pencil, ballpoint) and GENTLY touch the main lines,
until a long acoustic signal occurs. Short acoustic signals the
ongoing adjustment.
To confirm, press the centre button with pressure until you hear a beep.
The display can be adjusted horizontally and vertically. To do so, use a
sharp instrument (i.e. pencil, ballpoint) and GENTLY touch the main lines,
until a long acoustic signal occurs. Short acoustic signals the
ongoing adjustment.
To confirm, press the centre button with pressure until you hear a beep.