Hella Gutmann CSC-Tool SE Manual Del Usuario página 38

3. | Safety Precautions
3. Safety Precautions
3.1. General Safety Precautions
• The CSC-Tool SE is exclusively intended for use on a vehicle. It is a precondition for the use of the CSC-Tool SE that
the user has knowledge of automotive technology and is therefore aware of the sources of danger and risks in the re-
pair shop and on motor vehicles.
• Please read the entire operating instructions carefully before using the device.
• All notes given in the individual sections of the operating instructions apply. It is important to regard the following
measures and safety precautions.
• Furthermore, pay attention to all general instructions from labour inspectorates, trade associations and vehicle man-
ufacturers as well as all laws, legal ordinances and instructions which have to be commonly obeyed by a repair shop.
3.2. Safety Precautions – Risk of Injury
When working on the vehicle, there is a risk of injury through rotating parts or rolling of the vehicle. Therefore regard the
following:
• Protect vehicle against rolling away.
• Basically place the gear selector lever of AT vehicles to park position.
• Deactivate the start/stop system to avoid an inadvertent engine startup.
• Connect the device to the vehicle only when engine is shut down.
• Do not reach into rotating parts while the engine is running.
• Do not run cables near rotating parts.
• Check the high-voltage parts for damage.
38
Hella Gutmann
CSC-Tool SE