Hella Gutmann CSC-Tool SE Manual Del Usuario página 45

Hella Gutmann
4.3.2. Wheel Clamp Module SE (Optional)
24
23
22
21
13 Handle (Transport the wheel clamp module SE
easily with this handle.)
15 Set screw scale (Use this set screw to adjust and
fix the scale.)
17 Shaft with cross connector
19 Contact cylinder (The contact cylinder is used to
correctly position the wheel clamp module SE
against the tire or the rim.)
21 Level gauge (Use the level gauge to check whether
the wheel clamp module SE is attached horizon-
tally.)
23 Lasere module (Use the laser to project the real
value to the scale of the cross member.)
CSC-Tool SE
13
14
15
16
17
18
19
20
14 Scale of wheel clamp module SE (Here you can
16 Attachment bracket for vehicles (Use it to attach
18 Set screw shaft with cross connector (Use this set
20 Level gauge (Use the level gauge to check whether
22 Level gauge (Use the level gauge to check whether
24 Level gauge (Use the level gauge to check whether
check if the CSC-Tool SE is placed parallel to the
vehicle.)
the wheel clamp module SE to the tire.)
screw to adjust the height of the shaft with the
cross connector.)
the wheel clamp module SE is placed vertically.)
the wheel clamp module SE is attached horizon-
tally.)
the wheel clamp module SE is placed vertically.)
Product Description | 4.
45