Hella Gutmann CSC-Tool SE Manual Del Usuario página 39

Hella Gutmann
3.3. Safety Precautions for the CSC-Tool SE
In order to avoid incorrect handling and injury to the user or destruction of the CSC-Tool SE arising from this, pay atten-
tion to the following:
• Only assemble the CSC-Tool SE according to the assembly instructions.
• Protect the CSC-Tool SE from strong impacts and do not drop it.
• In case of damage of the CSC-Tool SE, the precise alignment of the vehicle is not longer ensured and warranty and
guarantee will become void.
• In case of necessary calibration work and repair steps of the CSC-Tool SE please contact a technician or trading part-
ner of Hella Gutmann.
3.4. Safety Precautions – Laser
There is a risk of injury through dazzling the eyes when working with the laser. Therefore regard the following:
• Do not direct the laser beam towards persons, doors or windows.
• Never look directly into the laser beam.
• Ensure proper room illumination.
• Avoid trip hazards.
• Secure mechanical parts from falling over or becoming loose.
Laser class 1M
The available laser radiation is within a wavelength range between 302.5 nm and 4000 nm. In this spectral range the most
frequently used materials in optical instruments are almost transparent.
The accessible laser radiation is not dangerous to eyes as long as the beam cross section is not reduced by optical instru-
ments (e.g. telescopes).
CSC-Tool SE
Safety Precautions | 3.
39