Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4
INSTALLATION
4.1
COLLECTION DOCK/CHARGING
DOCK
Install the dock
Place the dock against and perpendicular to the wall on
a level, hard floor, then insert the power plug into the
socket.
Place the dock
Place the dock against and perpendicular to the wall on
a level, hard floor, without obstacles within 60" in front
and 20" on left and right.
Dust box opening
Filter opening
Dust box
Fan filter
English
•
Install the charging dock or the dust collection
dock in a position where the vacuum cleaner can
easily reach. It is advisable to place the charging
dock or the dust collection dock against the wall on
a level, hard floor, not on the carpet.
•
Always keep the charging dock or the dust
collection dock powered on, otherwise the vacuum
cleaner will not automatically return.
•
To ensure normal charging, please do not move
the charging dock or the dust collection dock
frequently. After the location of the vacuum
cleaner is changed, the main machine may
regenerate a map due to failure to relocate (for
details, please refer to this Manual>Instructions for
Operation>Map Management).
4.2
PREPARE THE VACUUM
Remove the protective strip
Before use, remove the protective strips on both sides
of the front bumper.
Install the side brush
Side brush installation: align with the hole and press
gently to fix the side brush on the machine.
10
Filter
Dust bag handle
Dust bag
NOTE
Publicidad
