Publicidad
Idiomas disponibles
Idiomas disponibles
EN
•
Do not use a VPN (Virtual Private Network) or proxy
server.
•
The Wi-Fi router supports 802.11b/g/n and IPv4
protocols.
•
The router frequency band is 2.4GHz, or use a
dual-frequency router that supports the 2.4GHz
frequency band. The vacuum cleaner does not
support the 5GHz frequency band.
•
If the vacuum cleaner cannot be connected in the
2.4/5GHz dual-band Wi-Fi network, please switch
to the 2.4GHz network for Wi-Fi settings. After the
setting is completed, the frequency band can be
switched.
Network security requirements:
Use WPA and WPA2 networks encrypted with TKIP,
PSK, AES/CCMP.
5.4
WI-FI CONNECTION FAILURE
If you cannot use your smart phone to control the
vacuum , please try the following solutions. If the
problem persists, please contact our customer service
staff in time. Hotline: 1-888-909-6757
Wi-Fi Sta-
Cause
tus
The blue
The vac-
light is nor-
uum is
mally on.
connected
to the
router, but
cannot be
connected
to the net-
work.
The blue
The vac-
light flashes
uum can-
quickly.
not be
connected
to the
wireless
router.
NOTE
Solution
•
Check whether the router
is connected to the net-
work.
•
Contact the network op-
erator to find out wheth-
er there are any network
connection problems.
•
Check whether the
network name and
password have been
changed.
•
If necessary, reset the
Wi-Fi connection. Please
refer to the section "APP
Download and Network-
ing Operation > Reset
the Network" in this man-
ual.
English
The blue
The Wi-Fi
light flashes
connec-
slowly.
tion has
been re-
set or has
not been
set up be-
fore.
•
If other operations are triggered during the
networking process, the indicator light changes,
and the device still maintains the network
configuration status.
•
If the connection between the mobile phone and
the vacuum cleaner fails, you can reset the Wi-Fi
again to enter the network configuration mode and
add it again.
•
Due to version upgrades and renewals, please
follow the APP internal guide for actual operation.
6
OPERATION
6.1
START AND STOP THE VACUUM
CLEANER
On/Off
For the first use, toggle the main switch from O to I.
Press and hold the button
the machine.
Press and hold the button
the machine.
If the vacuum cleaner fails to respond, toggle the main
switch from I to O to forcibly turn off the machine.
•
Do not turn off the main switch directly during
cleaning, otherwise the data of the vacuum cleaner
cannot be saved.
•
If the main switch is in the O position, the vacuum
cleaner will automatically turn on when charged on
the charging dock, and will turn off when leaving the
charging dock.
•
If it is not in use for a long time, please toggle the
main switch to O.
Start cleaning
Press the button
mode. After starting, the vacuum cleaner will leave the
charging dock, automatically scan to generate a map,
intelligently determine its cleaning route, and divide
the space into multiple zones. The cleaning path will
12
•
Establish a Wi-Fi con-
nection to the main ma-
chine. Please refer to
the section "Using App
to Control the Main Ma-
chine" in this manual.
•
If necessary, reset the
Wi-Fi connection. Please
refer to the section "APP
Download and Networ-
kingOperation > Reset
the Network" in this man-
ual.
NOTE
for 3 seconds to turn on
for 3 seconds to turn off
to start the automatic cleaning
Publicidad
