Publicidad
Idiomas disponibles
Idiomas disponibles
Side brush
Turn on and charge
•
Flip the switch to "I" ，then fully charged (about 4
hours) .
•
Manually place the vacuum cleaner on the dust
collection dock and align it with the charging port.
When the blue indicator of the charging dock flashes
3 times and then goes out, the charging will begin.
NOTE
After the vacuum cleaner is connected with the dust
collection dock, the dust collection dock will start dust
collection.
5
APP DOWNLOAD AND
NETWORKING OPERATION
English
5.1
Scan the QR code and download and install the mobile
application.
5.2
Press and hold the button
same time until a voice prompt is heared, then the
indicator flashes slowly in blue, and the machine enters
the pairing status.
Indicator:
Indicator
The blue light flashes slowly: Waiting for connection
LED
The blue light flashes quickly: Connection to Wi-Fi in
progress
The blue light is normally on: Wi-Fi is connected
5.3
Open the app, create a new account, and follow the
instructions inside the APP.
A. Vacuum：
•
B. Wi-Fi network:
•
11
MOBILE APPLICATION
NOTE
If the mobile phone cannot be connected to the robot,
please refer to "Product Use" – "Reset Wi-Fi".
RESET THE NETWORK
Indicator:
ADD A DEVICE
NOTE
Before setting up Wi-Fi, please make sure that the
vacuum cleaner and the Wi-Fi network meet the
following requirements.
The battery level of the vacuum is greater than 20%
or the vacuum cleaner is placed on the charging
dock.
Use the correct wireless network password.
and the button
at the
EN
Publicidad
