Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS FOR OPTIONAL K-RAIL
1. See instructions included with the K-Rail
for installation before proceeding to step 2.
2. You will need (2) K-rail to complete this
assembly method. One K-rail to act as the
lower support and the other as an upper
support. At 32" in length, the K-rail is
perfectly suited to hold the (2) 16"W x 22"H
pegboards side-by-side. Position the lower
K-rail in your desired location, ensure it is
level and then secure to the wall per the
K-rail installation instructions.
(Note: apply enough torque to countersink
the installation screws into the K-rail to
avoid interference with the pegboard.)
3. Once you have the bottom K-Rail installed,
set the pegboards in the K-Rail groove and
lean them up against the wall and mark the
center of the pegboard holes on your wall.
2
3
9
Publicidad
