Ghibli & Wirbel FR15 E38 Uso Y Mantenimiento página 34

9.1.i - Timer (Fig. 1)
It is possible to visualize the working time of
the machine proceeding as follows:
- To turn on the timer it is necessary to start
the machine by pushing the "Brush rota-
tion" button (26) and keeping it pressed.
NOTE:
The timer counts up to 9999 hours.
Indication of the hours of work by units:
- one flash of Led (A) followed by as many
flashes of Led (E) as the units of hours of
work.
Indication of the hours of work by tens:
- one flash of Led (A) followed by as many
flashes of Led (D) as the tens of hours of
work.
Indication of the hours of work by hun-
dreds:
- one flash of Led (A) followed by as many
flashes of Led (C) as the hundreds of
hours of work.
Indication of the hours of work by thou-
sands:
- one flash of Led (A) followed by as many
flashes of Led (B) as the thousands of
hours of work.
10.1 DRAINING THE
RECOVERY WATER
At the end of the washing cycle or when the
recovery water tank (6) is full, it is necessary
to empty the tank by proceeding as follows:
NOTE:
To dispose of the recovery water, comply
with the standards in force in the country in
which the machine is used.
- Position the machine near to a drain out-
let.
- Disconnect the hose (15) from the sup-
port.
- Remove the cap (58) from the hose (15)
and drain all the water contained in the
tank.
11.1 MAINTENANCE AND
WARNING:
For information and warnings regarding
maintenance or cleaning, follow the in-
formation given in the "General warnings
during maintenance" in chapter 1 in this
manual.
OPERATIONS TO
PERFORM DAILY
11.1.a - Emptying and cleaning the
clean water tank (Fig. 16)
WARNING:
At the end of the washing operations, it is
compulsory to drain and clean the clean
water tank to prevent deposits or scaling.
After draining the recovery water tank, drain
the clean water tank as follows:
- Position the machine over a drain outlet.
- Turn the drain connector outwards (59).
ENGLISH - 10
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
(Fig. 15)
CLEANING