Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
• During unpacking, always wear gloves and protective eyewear, to prevent injuring hands and eyes.
• The pump is a heavy component (also refer to the "Specifications and technical data" paragraph). It is best therefore
to open and move the packaging according to the instructions on the packaging itself, using handling and lifting
equipment with a capacity compatible with the gross weight indicated on the shipping document.
• Lifting operations must be performed by expert personnel, in accordance with the workers' safety regulations applicable
in the country where the machine integrating the pump is assembled. In particular, operations must be performed very
slowly, without any sudden load shifts.
• The packaging elements (plastic bags, staples, etc.) must not be left within reach of children as they represent potential
hazard sources.
• Packaging components must be disposed of according to the regulations in force in the country where the machine
integrating the pump has been manufactured.
Plastic packaging must not be discarded in the environment.
• After unpacking the pump, make sure no parts are missing and that all parts are in perfect condition, and that the
identification plate is in place and legible.
In case of any doubt, do not install the pump, but contact the Manufacturer's After-Sales Service.
• The manuals and the warranty certificate must always accompany the machine integrating the pump and made
available to the end user.
CAUTION
• The pump must be handled cautiously, avoiding jerks and knocks.
Make sure the purchased product consists of the following elements:
• pump;
• pump manual (general section);
• pump manual (specific part for each series);
• declaration of conformity;
In case of problems, contact the Manufacturer's After-Sales Service.
WARNING
• Inadequate optional accessories could negatively affect pump operation and make this hazardous. Only ever use
genuine optional accessories recommended by the Manufacturer.
• As regards general information, safety precautions, installation and maintenance of optional accessories, refer to the
accompanying documents.
The standard pump equipment can be integrated with: pressure unloader/regulation valve, pressure relief valves,
check valves, suction filters, pressure accumulators, pressure gauges, etc.
For further details contact your dealer or the Manufacturer's After-Sales Service.
UNPACKING
STANDARD FITTINGS
OPTIONAL ACCESSORIES
EN
25
Publicidad
