HPP ET Serie Instrucciones Para El Ensamblaje Y Mantenimiento página 39

c) Check the condition of the
components and replace
anyworn ones.
CAUTION
• At every disassembly operation, always replace the O-rings and grease the seals with silicone grease: degree of
penetration according to ASTM 265-295 standard.
Sealing units for piston Ø 25
Sealing units for piston Ø 28
Sealing units for piston Ø 30
Sealing units for piston Ø 33
Sealing units for piston Ø 36
Sealing units for piston Ø 40
EN
Fig. 16
39