Light Bulb Replacement; Power Interruptions; When You Go On Vacation; When You Move - Sears Kenmore 795.7203 Manual De Uso

CARE AND CLEANING

LIGHT BULB REPLACEMENT

WARNING
LIGHT BULB REPLACEMENT
Electrical Shock Hazard
w WARNING
Before replacing a Compartment Lamp, either unplug
the refrigerator or turn off power at the circuit breaker
Electrical Shock Hazard
or fuse box.
Before replacing a burned-out light bulb, either unplug the
refrigerator or turn off power at the circuit breaker or fuse box.
NOTE: The refrigerator compartment has LED interior
lighting, and service should be performed by a qualified
NOTE: The refrigerator compartment has LED
technician.
interior lighting and service should only be performed
CHANGE FREEZER COMPARTMENT LIGHT BULB
by a qualified technician.
1. Unplug refrigerator power cord form outlet.
Change Freezer Compartment Light Bulb
2. Remove the screw using a Phillips screwdriver.
1. Unplug refrigerator power cord form outlet.
3. Grasp the light cover and pull the cover downward.
2. Remove the screw using a Phillips screwdriver.
CAUTION: Make sure that the bulb is cool to
3. Grasp the light cover, pull the cover downward.
the touch.
w CAUTION: Make sure the bulb is cool to the touch.
4. Rotate the bulb counterclockwise to remove.
4. Rotate the bulb counterclockwise to remove.
5. Replace with a new 60-watt appliance bulb.
5. Replace with a new 60-watt appliance bulb.
6. Insert tabs on back of cover into slots in freezer
6. Insert tabs on back of cover into slots in freezer ceiling.
ceiling. Push cover up to snap front into place.
Push cover up to snap front into place.
7. Tighten the screw using a Phillips screwdriver.
7. Tighten the screw using a Phillips screwdriver.

POWER INTERRUPTIONS

CARE AND CLEANING
1. If the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and
frozen.
POWER INTERRUPTIONS
2. If the power will be out for more than 24 hours, remove
1. If the power will be out for 24 hours or less, keep
all frozen food and store it in a frozen food locker.
all refrigerator doors closed to help foods stay
cold and frozen.

WHEN YOU GO ON VACATION

2. If the power will be out for more than 24 hours, remove
If you choose to leave the refrigerator on while you are
all the frozen food and store it in a frozen food locker.
away, follow these steps to prepare your refrigerator
before you leave.
WHEN YOU GO ON VACATION
1. Use up any perishables and freeze other items.
If you choose to leave the refrigerator on while you
2. Turn off the icemaker and empty the ice bin.
are away, follow these steps to prepare your refrigerator
before you leave.
If you choose to turn the refrigerator off before you leave,
1. Use up any perishables and freeze other items.
follow these steps.
2. Empty the ice bin.
1. Remove all food from the refrigerator.
3. Turn off the icemaker.
2. Depending on your model, set the thermostat control
If you choose to turn the refrigerator off before you
(refrigerator control) to OFF. See the Setting the
leave, follow these steps.
Controls section.
1. Remove all food from the refrigerator.
3. Clean the refrigerator, wipe it and dry well.
2. Unplug the refrigerator.
4. Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
3. Clean refrigerator, wipe it and dry well.
stops odor and mold from building up.
4. Tape rubber or wood blocks to the tops of both doors to
prop them open far enough for air to get in. This stops

WHEN YOU MOVE

odor and mold from building up.
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
WHEN YOU MOVE
1. Remove all food from the refrigerator and pack all
When you are moving your refrigerator to a new home,
frozen food in dry ice.
follow these steps to prepare it for the move.
2. Unplug the refrigerator.
1. Remove all food from the refrigerator and pack all
3. Clean, wipe and dry thoroughly.
frozen food in dry ice.
4. Take out all removable parts, wrap them well and
2. Unplug the refrigerator.
tape them together so they do not shift and rattle
3. Clean, wipe and dry thoroughly.
during the move. Refer to the Using your Refrigerator
4. Take out all removable parts, wrap them well and tape section for removable instructions.
them together so they do not shift and rattle during the
5. Depending on the model, raise the front of the
move. Refer to sections in Using your Refrigerator for
refrigerator so it rolls easier OR screw in the leveling
removable instructions.
legs all the way so they do not scrape the floor. See
5. Screw in the leveling legs all the way so they do not the Door Closing section.
scrape the floor. See the Door Closing section.
6. Tape the doors shut and tape the power cord to the
6. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
refrigerator cabinet.
When you get to your new home, put everything back and
When you get to your new home, put everything back
refer to the Refrigerator Installation section for preparation
and refer to the Installing Your Refrigerator section for
instructions.
preparation instructions.
34