Descargar Imprimir esta página

Makita AC001G Manual De Instrucciones página 7

Ocultar thumbs Ver también para AC001G:

Publicidad

Idiomas disponibles

Idiomas disponibles

Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4.
When not using the battery cartridge, remove
it from the tool or the charger.
5.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
Parts description
Fig.1
1
Air filter (air intake)
5
Regulator
9
Tank pressure gauge
CAUTION:
Always use accessories and attachments recommended for use with Makita product. Not
doing so may cause personal injury. Accessories and attachments must be used for its original purpose. If
you need any assistance, ask your local Makita Service Center.
3
2
1
12
2
Battery cartridge
6
Outlet pressure gauge
10
Safety valve
INTRODUCTION
General information
This air compressor is equipped with an Oil-Less pump
designed for durability and no maintenance.
The compressor can be used for properly rated pneu-
matic nailers and staplers. An air pressure regulator is
supplied for these applications.
Intended use
This air compressor is designed for professional finish
nailing and stapling applications.
WARNING:
Never use compressor for appli-
cations other than to operate a properly rated
nailer or stapler. Use of the compressor for other
applications could result in property damage and
personal injury.
Separate air transformers which combine the
functions of air regulation and/or moisture and dirt
removal should be used where applicable.
WARNING:
Use the pressure gauge only for a
reference. Check the air pressure using calibrated
measuring equipment during and after inflating
objects.
4
11
3
Carrying handle
7
Air outlet (NPT 1/4)
11
Drain valve
7 ENGLISH
5
6
7
8
9
10
4
On/Auto-Off switch
8
Quick coupler (country
specific)
12
Air tank

Publicidad

loading