Makita AC001G Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
SCFM @ 90 PSIG
(L/min @ 0.62 MPa)
Cut-In Pressure
Cut-Out Pressure
Outlet Max Pressure
Bore x Stroke x Qty
Motor RPM
Tank Size
Lubrication
Rated voltage
Dimensions (L x W x H)
Net weight
UL Listing for Canada and U.S.
• Due to our continuing program of research and development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from country to country.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the Makita battery cartridges and chargers listed above. Use of any other battery
cartridges and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Take particular care and attention.
volts
amperes
direct current
no load speed
revolutions or reciprocation per minute
1.2 SCFM (34 L/min)
0.72 MPa (105 PSIG)
0.93 MPa (135 PSIG)
0.93 MPa (135 PSIG)
36 mm (1-7/16") x 30 mm (1-3/16") x 1
D.C. 36 V - 40 V max
302 mm x 402 mm x 382 mm (11-7/8" x 15-3/4" x 15")
10.1 - 10.7 kg (22.3 - 23.6 lbs)
BL4020 / BL4025 / BL4040* / BL4050F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
IMPORTANT SAFETY
INSTRUCTIONS
IMPORTANT:
Read the Safety Guidelines and
ALL instructions carefully before operating.
www.makitatools.com
www.makita.ca
SAVE THESE
INSTRUCTIONS.
WARNING:
IMPROPER OPERATION OR MAINTENANCE
•
OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE.
READ AND UNDERSTAND ALL WARNINGS
•
AND OPERATING INSTRUCTIONS BEFORE
USING THIS EQUIPMENT.
2 ENGLISH
AC001G
6,000/min
7.6 L (2 gal)
Oil-Less
Yes