Srhythm NiceComfort 85 Manual De Usuario página 10

At a Glance
ANC Button
ANC indicator light
Charging Port
17
Multi-function Button
LED indicator light
Volume Up/Next Song
Volume Down/Previous Song
AUX Port
Microphones
How to Use
Use ANC Function
To turn on ANC, press the ANC Button when Bluetooth
turned on; Long press 3 seconds the ANC Button when
Bluetooth turned off ;
ANC
(the LED indicator light will be green when ANC ON)
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when
ANC OFF)
Use Transparency Function
Press the ANC button to switch between ANC mode,
ANC
Normal mode and Transparency mode.
Use Bluetooth Function
1.Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter pairing
mode.(the LED indicator light will be blue and red
flashing quickly.)
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "Srhythm NC85" to
click it to pair.(the LED indicator light will be blue
flashing slowly after pairing successfully.)
3-5S
3.Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth off.
Note: If NC85 is not paired with any devices within 5
minutes after Bluetooth turned on, it will automatically
shut down to save power .
Press to adjust volume. Long press to skip to
next/previous song.
Press the Multi-function Button to play/pause music
or answer/end call.
Double-press the Multi-function Button to reject an
incoming call.
2
Press the Multi-function Button 3 times to activate
voice dialingfunction.
3
18