Trevi TAB 10 4G S2 Manual Del Usuario página 20

BASIC OPERATIONS
Power On/Power Off
To turn on the device, press and hold the On/Off button (7) for 3 seconds. When the Home
page appears:
• Select a point on the screen and swipe up to unlock the Tablet.
To turn off the device, press and hold the On/Off button (7) for 2 seconds, until the "Turn
off" command appears, at this point touch it and confirm by selecting the "OK" icon.
Stand-by and Lock screen
To extend the battery life, you can put the device in sleep mode by deactivating the LCD
display. To do this, press the On/Off button (7) and release it immediately. Repeat the
operation to reactivate the display and bring up the screen lock mode.
Network Connection
The notification bar displays icons indicating:
Warns you that an unsecured Wi-Fi network is available.
Connected to a Wi-Fi network (waves indicate signal strength).
There are no Wi-Fi networks available or the Wi-Fi circuit is off.
Wi-Fi
The Wi-Fi connection can be used with a Wi-Fi Access Point (AP) connection or with a
connection without Wi-Fi hotpot security. Selecting this item accesses the wireless and
networks settings. To access the Internet, first of all, you need to configure a Wireless
network; to do this, you need to be in a Wi-Fi zone. Each time you are in a Wi-Fi zone that
you have previously configured, the device will try to connect automatically (if the Wi-Fi
function is active).
Warning: When you activate the Wi-Fi connection, the 4G data connection is disabled,
while the telephone function remains enabled.
Wi-Fi activation/deactivation:
1. On the Applications page, select the "Settings" - "Network and internet" icon and then
move the selector to the right side of the word Wi-Fi (activated green, deactivated gray);
2. To deactivate the WiFi connection, move the selector back to the left.
Note: To increase the battery life, it is recommended to turn off the WiFi connection when
not in use.
Search for and connect to a Wi-Fi network:
1. As soon as the ON command is selected, the Tablet will automatically activate a search
20