Black and Decker MS600B Manual De Instrucciones página 4

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
WARNiNg: use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSh/OShA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
WARNiNg: ALWAyS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. ALWAyS
WEAR CERTifiED SAfETy EQuiPmENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
• ANSI S12.6 (S3.19) hearing protection
• NIOSH/OSHA/MSHA respiratory protection
The label on your tool may include the following symbols.
Symbols
V ........................... volts
hz ......................... hertz
min ........................ minutes
...................... direct current
.......................... Class II Construction
......................... safety alert symbol
.../min ............... revolutions or reciprocations per minute
fuNCTiONAL DESCRiPTiON
A. Contour sanding attachments
b. Contour sandpaper
C. Sandpaper tips
D. Sandpaper
E. finger sanding attachment sandpaper
f. finger sanding attachment
G. Zone INDICATOR ("U" display)
h. "Off" Switch
I. "ON" Switch
G
h
I
4
A ......................... amperes
W ........................ watts
.......................alternating current
n o ....................... no load speed
....................... earthing terminal
D
A
b
f
E
C