KEKAI KT0935 Manual De Uso página 27

STEP D. Remove packaging attachments from the log
set.
1.Remove the front grass.
2.Remove the pear cotton block.
3.Remove the log set's packaging bag.
STEP E. Have two person to take the glass panel out of the
fireplace box. Place it to a soft and clean place. Figure (E)
STEP F. Take off the two screws in both sides of fireplace. Figure
(C) If the appliance is fully recessed into the wall:
*
Use the 4 screws(provided) to lock the appliance into wall with
the existing two side flanges, see Figure(F)
*
Install the media and re-install the glass front.
STEP G. Place the front panel lock the appliance. See Figure (G)
STEP H. Fireplace will be like this after installation Figure (H)
Wall Mounted installation
ONLY QUALIFIED PERSON CAN PERFORM THE INSTALLATION.
WARNING