Publicidad
Idiomas disponibles
Idiomas disponibles
Specification of Electric Fireplace
: WARNING – In order to avoid overheating, do not cover the heater.
If you have to leave for a long time, please turn off the main power switch after you.
MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk
of fire, electric shock or damage to persons.
GLASS CLEANING
The glass is cleaned in the factory during the assembly operation. During shipment,
installation, handling, etc., the clear door may collect dust particles; these can be
removed by dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the clear door can be cleaned with a damp
cloth. The clear door should be completely dried with a lint free cloth to prevent water
spots.
CAUTION
Do not use abrasive cleaners on glass surface or spray liquids directly onto any
surface.
FIREPLACE SURFACE CLEANING
Use a cloth dampened with warm water only to clean painted surfaces of the electric
fireplace. Do not use abrasive cleaners.
SERVICING
Except for light bulb replacement and cleaning described above, an authorized
service representative should perform any other servicing.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
Publicidad
