KEKAI KT0935 Manual De Uso página 31

POWER button on the keyboard will turn red to show all out, at this
time, the fan which inside electric fireplace will be continue to work for
10 seconds after stopped, then the electric fireplace is in standby state.
High Heating and Low heating setting:
If press "HEATER" button on keypad by 3 seconds,can switch
between℃and℉ (Please Note:this function is not available on the
remote control.) Boot default setting temperature is 22℃(72℉), if the
room temperature is lower than the setting temperature, Then the
electric fireplace high heating mode start to work, if you need electric
fireplace heating work in low heating mode, then click the keypad or
remote control the HEAT button to switch the heating on high and low
working mode ( first time press the button the display window will
display the current heating work mode, such as the current heating
setting mode is high heating then window display , when you press
the button once again , the window display the heating mode
become low heating , if you press the button once again, then the
window No heating mode display , the heating mode become OFF
mode, if you repeat press the HEAT button, then the heating mode will
be work on H-L-O three kind mode in cycles), every time you press the
button will have a short buzzer sound, if you want to turn off the electric
fireplace heating function, you also can operate on the keypad or
remote control setting temperature "DOWN" button Make the setting
temperature is lower than the room temperature , then you can shut off
the electric fireplace heating function. When the heating is turned off,
the fan which inside the electric fireplace will continue to work for 10
seconds before stopping.