Lavor SMV100 3-36 SAH Libro De Uso Y Mantenimiento página 30

WARNING: THE SUBSTITUTION OF THE FILTER MUST BE CARRIED ONLY BY PERSONNEL AUTHORIZED EACH
NON AUTHORIZED SUBSTITUTION AND / OR MAINTENANCE OF FILTERING SYSTEM CAN COMPROMISE
THE SAFETY OF APPLIANCE, IN THIS CASE THE PRODUCER DECLINES EVERY RESPONSIBILITY.
1. Disconnect and lift the head.
2. Unscrew the wing nut and remove the spring and washer
3. Remove the fi lter's cylindrical steel protection (unscrewing the screws on the edge)
4. Replace the fi lter with a proper one for the vacuum cleaner in use, check the fi lter integrity and the
presence of the gasket (G)
5. Mount the cylindrical protection
6. Install the new fi lter according to the label on the bottom of the fi lter
• Washer with rubber part facing the base of the fi lter
• Spring
• Plastic wing nut
7. Reconnect the System clean fi lter on the fi ltering chamber
FILTER REPLACEMENT
FILTER: 121600
FILTER PROTECTION: 122000
30
G