Publicidad
Idiomas disponibles
Idiomas disponibles
4. Weekly timing board function description
4.1
ON/OFF button: carry on the open and shut down operation; when the product is powered on
or shutdown, the switch indicator light is on; when the product is powered on, the flame indicator light is
on, the flame brightness is the maximum power output; the default timer key is: "00.00", the default
number of days is "SUN", the temperature shows room temperature;
4.2 Heating button: by pressing the heating button to adjust the product's high and low heating mode;
two indicator lights on high-grade, one indicator lights on low-grade; at the same time, the temperature
display digital screen flashes; the flashing time is 10 seconds;
4.3 Temperature adjustment: the temperature can be set in the heating mode; the setting range is
15~38℃; when the setting temperature is greater than room temperature, the product shall be heated
according to the set gear, when the setting temperature is lower than room temperature, the product
shall not be heated.
button, press "
4.4
time is 10 seconds, confirm the real-time day of the week by
button: press "
4.5
seconds; confirm the real-time hour by
button: press "
4.6
seconds; confirm the real-time minute by
4.7
button: set certain time on and off
button: press "
4.8
"
" buttons to adjust the corresponding parameters; through pressing "
(ON/OFF: ON is the certain timing start, OFF is the certain timing shutdown); through pressing
"+"
"
" / "
"/
shutdown time, you can separately set the timing boot or timing shutdown time; in the boot state, when
the set timing boot time is less than the timing shutdown time, the product can not be performed the
timing boot operation; when the timing shutdown time is less than the scheduled boot time, the product
shall first execute the timing boot, and then perform the timing shutdown ;
" button, the indicator light from Monday to Sunday begins to flash, flashing
" button, the digital clock screen begins to flash, flashing time is 10
" button, the minute digital screen begins to flash, flashing time is 10
" button to enter the weekly timing mode, it will need
"-"
/
buttons to adjust the hour, minute, to confirm the product timing start and timing
"+" "-"
button from 01-24 hours;
"+" "-"
button from 01-60 minutes;
"+" "-"
button;
"
"+""-"
"
" "
"
button to switch
23
Publicidad
