Publicidad
Idiomas disponibles
Idiomas disponibles
6.Operation
FR
7.Maintenance
8.Trouble Shooting
9.Disposal and recycling
ES
10.Warranty
11.EC Declaration of Conformity
PT
1.Intended Use
IT
The machine is designed for sawing wood, metal and plastic. It is suitable for
EL
straight and curved cutting.
PL
2.General Power Tool Safety Warnings
UA
WARNING!
provided with this power tool. Failure to follow all in-
RO
jury.
EN
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1)Work area safety
a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c)Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2)Electrical safety
a)Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded) power
112
2.General Power Tool Safety Warnings
tools.
b)Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c)Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d)Do not abuse the cord. Never use the cord for carrying, pulling or un-
plugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e)When operating a power tool outdoors, use an extension cord suita-
ble for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f)If operating a power tool in a damp location is unavoidable, use a re-
sidual current device (RCD) protected supply. Use of an RCD reduces the
risk of electric shock.
-
3)Personal safety
a)Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inat-
tention while operating power tools may result in serious personal injury.
b)Use personal protective equipment. Always wear eye protection. Pro-
tective equipment such as dust mask, non-skid safety shoes, hard hat, or hear-
ing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional staring. Ensure the switch is in the o -posi-
tion before connecting to power source and /or battery pack, picking
up or carrying the tool.
or energising power tools that have the switch on invites accidents.
d)Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may re-
sult in personal injury.
e)Do not overreach. Keep proper footing and balance at all times. This
113
FR
ES
PT
IT
EL
PL
UA
RO
EN
Publicidad
