Publicidad
Idiomas disponibles
Idiomas disponibles
7.Maintenance
FR
ES
brush holder
d)Maintenance the supply cord
If the replacement of the supply cord is necessary, this has to be done by the man-
PT
ufacturer or his agent in order to avoid a safety hazard.
If a set of spare carton brush is included in this package for replacement pur-
IT
poses. The check and replacement of the brushes should only be performed by a
ble insulation. To assure the safety of our customers, we strongly recommend
EL
against the consumers checking and changing the brushes.
Under normal usage, the carbon brushes will last beyond the 90 days warranty
PL
period. Therefore, do not open the body housing within 90 days of purchase to
inspect the brushes or the manufacturer warranty will void at that time, please
UA
see warranty section if a return is necessary.
RO
Please read "WARNING" or previous section regarding
WARNING!
checking and changing of the SAW BLADE.
EN
1.Replace the saw blade according to which material to cut, as soon as its teeth
are blunt and proper sawing is therefore no longer possible.
2.Clean the appliance after completing your sawing work.
3.Remove any dirt (e.g. sawdust). If necessary, clean the saw blade mounting
with a brush or blow it out with compressed air .
120
8.Trouble Shooting
Problem
Product does not start
-
Product does not reach full power
Unsatisfactory result
9.Disposal and recycling
dumps, hazardous substances can leak into the groundwater and get into
the food chain, damaging your health and well-being.
10. Warranty
a)Our products are designed based on the most rigorous quality standards for
products intended for the general public.
b)The jig saw (Model ZY504) is covered with a warranty of 2 years starting from
the date of purchase. This warranty covers all manufacturing or material defects.
c)In the event of a breakdown, please refer
Possible cause
Solution
Not connected to power supply
Connect to power supply
Power cord or plug is defective
Check by a specialist electrician
Other electrical defect to the product
Check by a specialist electrician
Extension cord not suitable for operation with
Use a proper extension cord
this product
Power source(e.g. generator)has too low volta-
Connect to another power source
ge
Air vents are blocked
Clean the air vents
Blade is worn
Replace with new blade
Meaning of crossed -out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities. Contact your local
government for information regarding the collection systems
to the troubleshooting page
121
FR
ES
PT
IT
EL
PL
UA
RO
EN
Publicidad
