4.5.4 Connect 3G/4G Dongle
Connect the purchased dongle to the USB connector at the bottom of the Cassia X1000 gateway.
NOTE!
The 3G/4G dongle is optional, that is, it is not necessary for the Cassia X1000 gateway to operate. This
step is only necessary if the user chooses to connect the gateway to the internet via 3G/4G network.
4.5.5 Close the Bottom Cover
Place the Ethernet and ground cables in the cable entry located on the back of the gateway.
Fit the cover according to the position of the 3 fixing tabs and turn clockwise.
Figure 4.10: Cassia X1000 inserting the 3G/4G dongle
Figure 4.11: Cassia X1000 closing the cover
Installation
Gateway Cassia X1000 | 18