WEG Cassia X1000 Manual General De Instalación Y Operación página 8

2 PRELIMINARY RECOMMENDATIONS
The next chapters of this manual are conceived to give you complete step-by-step support for installing and
configuring the Cassia X1000 gateway.
Chapter 4: Installation -> Chapter 5: Gateway Settings -> Chapter 6: Sensor Settings
Chapter 4 INSTALLATION on page 10
its physical installation, as well as tips on how to install it for the best possible result. Options for infrastructure
solution will be presented so that users can choose the best option according to their needs.
Chapter 5 GATEWAY SETUP on page 21
WEG Motion Fleet Management (WEG MFM) online platform. Once the infrastructure solution has been chosen in
Chapter 4 INSTALLATION on page
networks.
Chapter 6 CONFIGURATION THE SENSORS on page 28
product to the WEG MFM online platform via application.
ATTENTION!
Failure to follow the instructions in the chapters may cause the product to malfunction and/or irreparably
damage it. It is recommended to thoroughly follow the order proposed in this manual to obtain the
best result with your product.
will provide you with support to understand how the gateway works and
will provide you with the steps to configure the gateway along with the
10, the product must be set to work as desired, configuring the necessary
will show you how to add existing sensors near the
Preliminary Recommendations
Gateway Cassia X1000 | 8