WEG Cassia X1000 Manual General De Instalación Y Operación página 23

Gateway Setup
5.2.3 Home Page Password Registration
Once the IP address 192.168.40.1 has been accessed through a browser of the user's choice, a screen will appear
asking to update the access password. In the "Old password" field, enter the password "admin". In the "New
password" and "Confirm password" fields, enter a password of your choice. This password will be used whenever
accessing the gateway settings screen locally.
By clicking "Login", the new password will be saved, and you will return to the home screen. On the home screen,
use the user "admin" and the password previously registered.
Figure 5.3: Password update screen
NOTE!
If the user forgets the password, reset the Cassia X1000 gateway to the factory settings by pressing
the reset button located at the bottom of the product for 15 seconds. The password will be "admin"
again, and a new password will be requested.
5.3 BASIC GATEWAY SETTINGS
After entering the username and password, you will be redirected to a settings panel with 5 possible tabs: "Status",
"Basic", "Container", "Events" and "Other". Select the "Basic" tab. On this tab, you will set all the information
necessary for the correct operation of the gateway together with the WEG Motion Fleet Management platform.
The figure below shows the gateway basic data.
23 | Gateway Cassia X1000
Figure 5.5: Cassia X1000 gateway basic data screen
Figure 5.4: Login screen