Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and Connection
Installation and Connection
Connecting external components
30
ENGLISH
1 GPS antenna input (GPS) (page 29)
2 HDMI terminal
3 Rear view camera input (R-CAM)
4 Video output (V-OUT)
5 Audio video input (AV-IN)
6 iDatalink input for connecting an ADS adapter
FRONT
(commercially available)
VIEW
CAMERA
7 Expansion port for connecting SiriusXM Connect
Vehicle Tuner (EXT I/F) (commercially available)
8 Front view camera input
9 Microphone input (MIC) (page 31)
p Antenna terminal
(USB1)5V
1.5A
q USB terminal
w Output terminals*
• Left output (White)
• Right output (Red)
REAR: Rear speaker preouts
FRONT: Front speaker preouts
SW: Subwoofer preouts
For 3-way crossover:
REAR: Tweeter preouts
FRONT: Mid range speaker preouts
SW: Subwoofer preouts
* When connecting an external amplifier, connect its ground wire
to the chassis of the car; otherwise the unit may be damaged.
2 Use HDMI cable KCA-HD200 (optional
accessory).
W: 11.1 mm or less
W
H: 7.7 mm or less
H
D: 21.5 mm or less
D
When you connect the cable to HDMI terminal,
detach the fixture. After connecting the cable,
attach the fixture back using the screw.
HDMI cable
Fixture
5 Connect the following type of 4-pole mini plug:
1 Left audio
1
3
2 Right audio
3 Ground
24
4 Composite video
7
Antenna
SiriusXM Connect Vehicle Tuner
(Commercially available)
Publicidad
