We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#33
φ 58*φ 23*M10
# 76
φ 2 8* φ 1 0. 2* 1. 0
1
11
33
#66 S13-15-17
#67 S6
#55 φ16*φ8*1.5
#60 M8*20
#63 M8*35
#62 M8*60
#61 M8*55
#52 M8
77
72
55
60
55
60
1PC
1PC
4
1PC
1PC
8PCS
4PCS
1PC
1PC
2PCS
1PC
29
61
30
4
55
62
77
72
STEP 5:
Loosen and remove the Adjustment Knob
(No. 33), the Flat Washer (No. 76) and the
Regulator (No. 11) from the Seat Post (No.
4).
Attach the Seat Post (No. 4) onto the Main
Frame (No. 1) with 1 Regulator (No. 11), 1
Adjustment Knob (No. 33) and 1 Flat
Washer (No. 76) that were removed.
76
Adjust the Seat Post (No. 4) to the desired
position, then secure it in place by tightening
the Adjustment Knob (No. 33).
STEP 6:
Attach the Seat (No. 30) onto the Seat Post
(No. 4) with 4 Hexagon Bolts (No. 60) and
4 Flat Washers (No. 55). Tighten with Allen
Wrench (No. 67).
Attach the Rear Handlebar (No. 5) onto the
Seat Post (No. 4) with 2 Flat Washers (No.
55), 1 Hexagon Bolt (No. 63), 1 Cross Head
Bolt (No. 62) and 1 Lock Nut (No. 52).
Tighten with the Spanner (No. 66) and the
5
Allen Wrench (No. 67).
52
Attach the Back Cushion (No. 29) onto the
55
Seat Post (No. 4) with 2 Flat Washers (No.
55) and 2 Hexagon Bolts (No. 61). Tighten
with the Allen Wrench (No. 67).
55
63
Lastly, connect the Sensor Wire 4 (No. 72)
to the Sensor Wire 5 (No. 77).
The assembly is complete!
9