Publicidad
Idiomas disponibles
Idiomas disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#66 S13-15-17
#58 M8*65
#54 φ20 *1.5
#53 M8
#67 S6
#54 φ20 *1.5
#59 M8*15
59
54
70
71
59
72
69
70
71
23a 23a
23a
23a
38
38
38
38
ASSEMBLY INSTRUCTIONS
1PC
4PCS
4PCS
4PCS
1PC
4PCS
4PCS
54
2
59
54
23a
38
69
72
1
STEP 1:
Attach the Front & Rear Stabilizers (No. 6
& No. 68) onto the Main Frame (No. 1) with
4 Cross Head Bolts (No. 58), 4 Arc
Washers (No. 54), and 4 Cap Nuts (No. 53).
Tighten with the Spanner (No. 66).
STEP 2:
Connect the Sensor Wire 2 (No. 70) with
Sensor Wire 1 (No. 69), connect the Sensor
Wire 3 (No. 71) with the Sensor Wire 4 (No.
72).
23
CAUTION: Please make sure the Tension
Control Knob (No. 23) is at the highest
resistance level (level 8, all the way to the
right) before you connect the Tension Wire
(No. 38).
Connect Tension Control Wire (No. 23a)
and Tension Wire (No. 38). Then, pull
Tension Control Wire (No. 23a) upward and
insert it into the slot of metal bracket on
Tension Wire (No. 38). Make sure the metal
fitting on Tension Control Wire (No. 23a) is
secured in the metal bracket.
Attach the Front Post (No. 2) onto the Main
Frame (No. 1) using with 4 Hexagon Bolts
(No. 59) and 4 Arc Washers (No. 54).
Tighten and secure with the Allen Wrench
(No. 67).
6
Publicidad
