How to Access the Settings Interfa
To change or view range extender settings, rst connect to an extended network, e.g.,
MyWiFi_Ext. In a browser, go to
Your range extender's default admin password is "admin". It is highly recommended that you
change this after WPS setup.
To change your admin pas
new password under
If you have not changed the
interface when connected to your main router
Enter into a browser
or iO S).
—
Note
XXX are the last 3 digits of your range extender's MAC address. You can nd the MAC
address on the back
http://extender.linksys.com
sword , click the
Extender Access
.
range extender 's default name, you can
http://RE7000
-X XX
of your RE 70 00. (You might have to unplug your range extender to see the
and enter admin password.
Management
tab of the settings interface
.
(Window s) or
http:/ /RE7000
ce
and enter a
also access the settings
-X XX.local
or (Mac OS X
17