Publicidad
Idiomas disponibles
Idiomas disponibles
o
Solid amber
your router.
o
Blinking amber
you router.
7.
Connect your Wi
If you have setup your range extender with a Linksys Max
to do anything. Max -Stream routers support seamless roaming, and your extended Wi
network shares
main or extended network as you move around the coverage area.
If you do not have a router with seamless roaming, select the extended network on your
device's Wi -Fi manager. Extended
your main network name(s). Password(s) will be the same as those for your main
network(s).
Note —To learn more about seamless roaming and see a list of supported devices visit
www.linksys.com/seamless
Your range extender is now set up. Enjoy your extended Wi
Browser -based setup
Use this setup method if you don't have a WPS button on your router
want to use WPS to set
1.
Plug in the range extender
Plug in the range extender midway between your router and the area without Wi
your mobile device or laptop, be sure you have at least two bars (around 50%) of your
router's Wi -Fi signal at that location. If you don't have two bars, move the range ext
closer to the router. You can move the range extender to an ideal location later using the
setup software.
Weak connection to the router. Find an outlet closer to
Not connected to the router. Find an outlet closer to
-Fi devices to the extended network you just created.
the same network name and password. Connected devices will select the
networks are identi ed by "_Ext" added to the end of
-ro aming.
up your RE7000
-Stream Router, you don't have
-Fi coverage.
.
-Fi
, or if you don't
-Fi. Using
ender
9
Publicidad
